PPA ENERGO s.r.o.

PPA ENERGO s.r.o. is the largest subsidiary of the PPA CONTROL holding. It is mainly focuses on nuclear power engineering. Currently, it is largely contributing to the completion of Mochovce nuclear power plant - EMO 3 and 4.

Focus of activity

It offers comprehensive services in the area of: Automated control systems, field instrumentation and electric systems for conventional and nuclear power engineering, which can be divided into the following categories:

Production of switchboards

  • 0.4KV LV SMO switchboards (Rittal, Sarel, Profiline, Schrack boxes)
  • 0.4 KV LV switchboards for nuclear power plants (SMO-S, SBO, NRS-S)
  • RVB modular switchboards with sliding blocks (Logstrup boxes)
  • System switchboards for control systems, servers and PCs
  • Industrial and data communications switchboards

 

  • Compensation switchboards
  • Wall-mounted NRS and NRS-P switchboards
  • Control room panels and desks
  • Traffic signs

Modular RVB switchboards can be used mainly in applications with continuous operation or in places where maximum emphasis is put on the system functionality with the shortest possible time of removing any eventual faults, without shutting down the entire switchboard.

Use of RVB switchboards:

  • Power engineering (also with the need for increased resistance to seismic events)
  • Industry
  • Technological equipment of buildings
  • Food and chemical industries

Safety:  

  • system of protection against electric arc (exhaust flaps over the main bus system, exhaust of gas from fixed and withdrawable units, partitions between fields, additional locks on doors and so on),
  • blocking of withdrawable modules against pull-out in the switched-on state,
  • test positions of modules
  • internal protection of switchboard even in the removal of withdrawable units is IP20,
  • internal segregation

Electrical parameters:

Rated operating voltage (Ue) 690 V AC
Rated insulation voltage (Ui) 1,000 V
Rated frequency 40-60 Hz
Main horizontal buses
Rated current (In) 8,500 A
Rated short-time current (Icw) up to 130 kA/1 sec.
Rated peak withstand current (Ipk) up to 300 kA
Vertical buses – pull-out system
Rated current (In) 1,600 A
Rated short-time current (Icw) up to 70 kA/1 sec.
Rated peak withstand current (Ipk) up to 154 kA

Dimensions of boxes:

width 380 – 1710 mm
height 1995 – 2375 mm
depth 600 – 1010 mm


TYPE TESTING AND CERTIFICATION OF RVB SWITCHBOARDS, PC SUBTYPE:
tabuľka RVB SUBTYP PC certifikát


TYPE TESTING AND CERTIFICATION OF RVB SWITCHBOARDS, MCC SUBTYPE:
tabuľka RVB SUBTYP MCC certifikát

TYPE TESTING AND CERTIFICATION OF RVB SWITCHBOARDS, DC SUBTYPE:
tabuľka RVB SUBTYP DC certifikát

SMO switchboards are intended primarily for power engineering industry and technological security of buildings. The equipment of boxes is assembled into structures of various manufacturers such as RITTAL, SAREL, PROFILINE, EATON, SCHRACK, ZVS-ENCO, TVD Slavčín and others.


Range of use:

  • Power distribution cabinets of power supply
  • ASRTP switchboards
  • SMO-S type is designed for environments with increased need for seismic resistance

Electrical parameters: Rated voltage up to 400 V AC 50-60 Hz, 220 V DC, rated peak withstand current Ipk 40 kA, rated current up to 2,500 A, IP44, IP54/20 protection

Dimensions of boxes: width 400 – 1,600 mm, height 1,200 – 2,200 mm, depth 400 – 1,000 mm

TYPE TESTING AND CERTIFICATION OF SMO SWITCHBOARDS:

TYPE TESTING AND CERTIFICATION OF SMO-S SWITCHBOARDS:

SBO switchboards are intended primarily for the nuclear power industry, power plants and industry with the requirement for earthquake resistance. Allow creating complicated assemblies.


Range of use:

  • Power distribution cabinets of power supply
  • ASRTP switchboards
  • Control room panels

 

Electrical parameters: Rated voltage up to 400 V AC 50-60 Hz, 220 V DC, rated peak withstand current Ipk 40 kA, rated current up to 2,500 A, IP44, IP54/20 protection

Dimensions of boxes: width 400 – 1,200 mm, height 1,800 – 2,300 mm, depth 400 – 1,200 mm

TYPE TESTING AND CERTIFICATION OF SBO SWITCHBOARDS:
SBO3

Wall switchboard cabinets are self-supporting and intended to be mounted on a wall or the structure of technology equipment. They are made ​​of plastic.

Use of switchboards:

  • to distribute electrical power up to 250A
  • ARS cabinets for smaller-scale technological devices
  • cabinets for measuring and control
  • local control cabinets
  • Terminal boxes, etc.

Electrical parameters: Rated voltage 400 V AC 50Hz, rated current up to 250 A


Dimensions of cabinets: width 300 – 1,100 mm, height 300 – 1,800 mm, depth 150 – 300 mm

 

CERTIFICATION AND TYPE TESTS

tabuľka NRS-PNRS-P3

Wall switchboard cabinets are self-supporting and intended to be mounted on a wall or the structure of technology equipment. They are made ​​of steel or stainless steel plate surface treatment.

Use of switchboards

  • to distribute electrical power up to 630 A
  • ARS cabinets for smaller-scale technological devices
  • cabinets for measuring and control
  • local control cabinets
  • Terminal boxes, etc.
  • NRS-S type is seismically resistant and suitable for nuclear power plants, boats and so on.

Electrical parameters: Rated voltage 400 V AC 50 – 60 Hz, 220 V DC, rated current up to 630 A


Dimensions of cabinets: width 300 – 1,100 mm, height 300 – 1,800 mm, depth 150 – 300 mm

CERTIFICATION AND TYPE TESTS
NRS

tabuľka NRSNRS a NRS-S 3

under the EP and Council directives, transposed to the “Regulation of the Slovak Government”, as amended: LVD Directive 2006/95/EC – SR Government Regulation No. 308/2004 Coll., EMC Directive 2004/108/EC – SR Government Regulation No. 94/2005 Coll.
NRS-S

tabuľka NRS-S

under the EP and Council directives, transposed to the “Regulation of the Slovak Government”, as amended: LVD Directive 2006/95/EC – SR Government Regulation No. 308/2004 Coll., EMC Directive 2004/108/EC – SR Government Regulation No. 94/2005 Coll.

Contacts

PPA ENERGO s.r.o.
Vajnorská 137, 830 00 Bratislava
Director: Ing. Zoltán Lovász
Sales Director: Ing. Peter Spilý
Phone: + 421 2 442 52 537
Fax: + 421 2 492 37 547
E-mail: energo@ppa.sk